hbt-prog4

Rear frame interior.

Bookmark the permalink.

2 Responses to hbt-prog4

  1. Tony says:

    Hi Greg, How did you cet the top and bottom stopped rabbets for the top and bottom, in the front and rear rails? I am trying my stanley 45, no good.. chisel seems the logical choice but time is the enemy of effeciency. Cheers, Tony

    • Greg Merritt says:

      I plowed as much as I could and then used a chisel for the rest. It doesn’t take as long as you think it would once you get going. Knife the walls and then use the chisel (bevel down) to plow out the waste. Alternate between knifing the walls and plowing with the chisel and it goes pretty quickly. Be sure to chop out (like a mortise) the ends of the groove first. This will prevent you going too far when plowing out the waste with the chisel.

Leave a Reply to Tony Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s