I have been having a lot of fun with then lathe, but it is time to get back on track. I have two new tables that are in desperate need of some sort of accompanying seating. To that end my first run at keeping butts off the floor will be four Welsh inspired stools.
I’m lucky in that Chris Schwarz just completed a run of High Staked Stools built in this manner. So he effectively did all of my prototyping for me (thanks Chris!). He worked through several seat, leg and stretcher shapes in his process. His posts about them allowed me to see the forms, eliminate options and firm up my own plans.
My version will draw visual elements from my tables and will be a couple of inches higher than a standard dinning chair. It has been my experience that stools matching dinning chair height always feel too short in use. There is a delicate balance between seating height, the sitter’s center of gravity and the back of chair. Remove the back and everything feels off. So my stools will be a little higher to try to bring things back into balance (I hope).
These four stools will have SYP seats, red oak legs and white oak stretchers. I began by milling the red oak leg stock.
Then laid them out to be tapered octagons.
To shape the legs, I first removed the bulk of the waste with a drawknife at the shaving horse. Then refined the octagon with a plane.
On all of my previous staked projects I have used the Veritas tapered tenon cutter and reamer. They work well, but I will be trying out a 1″ diameter round tenon method on these stools. From what I can find this method was used by John Brown and was recently demonstrated in Don Weber’s video “Build a Welsh Stick Chair”. Thanks to the new lathe, creating the 1″ tenons is quite easy.
After an afternoon of work, I have all of the legs ready to go.
Next I’ll work on the seats.
Greg Merritt Part 2