Tag Archives: tansu

HB Tansu Progress-6

Posted on August 17, 2014 by Greg Merritt

The HB Tansu carcass is complete and finished.  Today I fitted and installed the drawer guides.  A simple matter of cutting and planing to fit then just glue them into place.  I then cut off the protruding tenon stubs left … Continue reading →

Posted in Hillbilly Tansu-000 | Tagged , , , | 16 Comments

HB Tansu Progress-5

Posted on August 16, 2014 by Greg Merritt

I bolted awake in the wee hours of the morning with an idea.  OK, let me back up a little.  When I start a project I usually have the finish worked out before the lumber is even purchased.  I know … Continue reading →

Posted in Finishing, Hillbilly Tansu-000 | Tagged , , , | 5 Comments

HB Tansu Progress-4

Posted on August 15, 2014 by Greg Merritt

My order of birch plywood arrived from Woodcraft this week.  Between work and school functions for my my son, I managed to get a few hours in the shop over the last few days.  I cut and fitted the outside … Continue reading →

Posted in Hillbilly Tansu-000 | Tagged , , | 2 Comments

HB Tansu Progress-3

Posted on August 10, 2014 by Greg Merritt

Another productive weekend of working in the shop is in the books.  Admittedly I did steal a few minutes in the shop after work just about everyday of the past week.  That little bit set me up for quite a … Continue reading →

Posted in Hillbilly Tansu-000 | Tagged , , , | 4 Comments

HB Tansu Progress-2

Posted on August 7, 2014 by Greg Merritt

The weather today was unseasonably mild for August.  So I took advantage and worked in the shop for about an hour and a half.  I was able to get, I think, quite a bit done. I cut the six pieces … Continue reading →

Posted in Design, Hillbilly Tansu-000 | Tagged , , , | 5 Comments

HB Tansu Progress-1

Posted on August 3, 2014 by Greg Merritt

I was able to make a good start on the HB Tansu this weekend.  The weather was tolerable, still a bit on the humid side, and there was no other pressing chores that needed to be done.  I started off … Continue reading →

Posted in Hillbilly Tansu-000, Illustrating | Tagged , , , | 8 Comments

Hillbilly Tansu-000 and it Begins

Posted on July 31, 2014 by Greg Merritt

Now that I have all of the pertinent joinery worked out and detailed, its time to tackle my first design.  This first iteration of the Hillbilly Tansu will be like most of my other projects, functional, clean lines and simple … Continue reading →

Posted in Design, Hillbilly Tansu-000, Illustrating | Tagged , , , | 7 Comments

Hillbilly Tansu Handle Rail

Posted on July 28, 2014 by Greg Merritt

Some, not all, but some, of my intended chest designs will require handles for lifting.  I could go the standard route and purchase handles.  Where’s the fun in that?  So I’ll be creating my own, much along the same lines … Continue reading →

Posted in Design, Illustrating, Knot Tying | Tagged , , , , , | 3 Comments

Hillbilly Tansu Marking Gauge

Posted on July 20, 2014 by Greg Merritt

While working through the design elements of the Hillbilly Tansu I paid particular attention to how the joinery was laid out.  The last thing I wanted to do was create something that would require multiple gauges and several different tool … Continue reading →

Posted in Design, Hillbilly Tansu Joinery | Tagged , , , | 5 Comments

Hillbilly Tansu Side Bearer

Posted on July 20, 2014 by Greg Merritt

So I’ve shown the front and rear bearers now I ‘ll show how I plan to connect the two.  The joinery is really very simple.  A full length groove and two stub tenons.  These pieces will complete the enclosure of … Continue reading →

Posted in Design, Hillbilly Tansu Joinery | Tagged , , , | Leave a comment