Tag Archives: knotted pull

Mini Three Drawer Chest

As I update old drawings, I will post those that I hope you will find useful.  Some may be new versions of those that you have seen before.  Others will be making a first time appearance here on the blog. … Continue reading

Posted in Design, Illustrating, Mini Three Drawer Chest | Tagged , | 6 Comments

Cedar Chest Facelift

As soon as the headboard was installed, upholstery project #2 became evident.  There is a cedar chest/bench that sits at the foot of our bed and management wanted it to match the new headboard.  The chest is a family piece from management’s … Continue reading

Posted in Upholstery | Tagged , , , | 13 Comments

Bookcase-Progress 10-Complete

After two coats of my “pine” enhancer concoction, two coats of T&T Original and a final coat of paste wax I’m calling the bookcase done.  All-in-all I’m pretty happy with the end result.  My finish experiment went really well and … Continue reading

Posted in HBD Bookcase | Tagged , , , | 21 Comments

HB Hobby Tansu #1-Part 15-Complete

Over the course of this past week I applied three coats of Tried & True Original oil finish to the Hillbilly Hobby Tansu.  I also used the evenings this week to tie and ready the “hardware”.  All of the pulls … Continue reading

Posted in Hillbilly Hobby Tansu-000 | Tagged , , , | 16 Comments

HB Tansu #3-Progress 20-Complete

I’m calling it done! Over the last several days I have been adding the finishing touches to Hillbilly Tansu #3.  Primarily, the actual finish.   I used several coats of Tried & True Original which is a mixture of polymerised linseed … Continue reading

Posted in Hillbilly Tansu-002 | Tagged , , , , | 26 Comments

Hillbilly Mini Tansu-Progress 9-Complete

I woke up Saturday morning and changed my mind.  I was originally going to finish this project with Tried and True oil.  But I decided to go with clear shellac.  The entire mini tansu already had two coats of BLO … Continue reading

Posted in Finishing, Hillbilly Inlay, Hillbilly Mini Tansu-000 | Tagged , , , , | 20 Comments

HB Tansu Progress-8

I wasn’t completely satisfied with the joinery at the rear of my first drawer.  I spent most of Friday evening trying to come up with a better layout.  I also wanted to make assembling the drawer easier.  The pegging system … Continue reading

Posted in Hillbilly Tansu-000 | Tagged , , , | 4 Comments