Category Archives: Design

Hillbilly Tansu Handle Rail

Posted on July 28, 2014 by Greg Merritt

Some, not all, but some, of my intended chest designs will require handles for lifting.  I could go the standard route and purchase handles.  Where’s the fun in that?  So I’ll be creating my own, much along the same lines … Continue reading →

Posted in Design, Illustrating, Knot Tying | Tagged , , , , , | 3 Comments

Hillbilly Tansu Marking Gauge

Posted on July 20, 2014 by Greg Merritt

While working through the design elements of the Hillbilly Tansu I paid particular attention to how the joinery was laid out.  The last thing I wanted to do was create something that would require multiple gauges and several different tool … Continue reading →

Posted in Design, Hillbilly Tansu Joinery | Tagged , , , | 5 Comments

Hillbilly Tansu Side Bearer

Posted on July 20, 2014 by Greg Merritt

So I’ve shown the front and rear bearers now I ‘ll show how I plan to connect the two.  The joinery is really very simple.  A full length groove and two stub tenons.  These pieces will complete the enclosure of … Continue reading →

Posted in Design, Hillbilly Tansu Joinery | Tagged , , , | Leave a comment

Hillbilly Tansu Rear Bearer

Posted on July 19, 2014 by Greg Merritt

Directly opposite of the front bearer in the Hillbilly Tansu is, you guessed it, the rear bearer.  This element of the assembly will tie the two rear posts together and provide attachment points for the side bearers and the dust … Continue reading →

Posted in Design, Hillbilly Tansu Joinery | Tagged , , , | 1 Comment

Back on the Grid and a Carcass Laid Bare

Posted on July 10, 2014 by Greg Merritt

The power company has me reconnected to the grid.  It’s amazing how dependent I am on electricity.  It’s a little scary, actually.  But that is the life we live now.  Anyway, glad to have the electrons flowing again. I thought … Continue reading →

Posted in Design | Tagged , , , | 8 Comments

End Tables Part 13 – Done!

Posted on July 3, 2014 by Greg Merritt

  Whew!  These tables are now moved into the done column.  This has been a long and drawn out build for me and taxed the confines of my small shop.  I actually had to move the bases into the house … Continue reading →

Posted in Design, End Tables, Finishing | Tagged , , , , , , , | 6 Comments

End Tables Part 12

Posted on June 29, 2014 by Greg Merritt

Heat index of 89F and 68% humidity for the last two days.  So I put on my big boy pants, tied a bandana around my head and went to work in the shop.  In short, it sucked!  But I did … Continue reading →

Posted in Design, End Tables, Finishing | Tagged , , | 7 Comments

Build Yourself a Sokozarai-Nomi (Bottom Cleaning) Chisel

Posted on June 15, 2014 by Greg Merritt

My Hillbilly Tansu project requires the chopping of several narrow and deep mortises.  6mm(W)x18mm(L)x24mm(D) to be exact.  Clearing the waste from these mortises is difficult to say the least.  There is almost no room to lever out any of the waste … Continue reading →

Posted in 5-Tools, Design, Hillbilly Tansu Joinery, Illustrating, Sokozarai-Nomi (Bottom Cleaning) Chisel | Tagged , , , , , , | 10 Comments

End Tables Part 10

Posted on June 7, 2014 by Greg Merritt

I managed to get two panels edged and glued together.  Which means I promptly ran out of clamps.  So while those are curing I’m on hold until tomorrow for the other two panels.  I’m not sure why, but I do … Continue reading →

Posted in 5-Tools, Design, End Tables | Tagged , , | 3 Comments

Hillbilly Tansu Front Drawer/Door Bearer

Posted on June 7, 2014 by Greg Merritt

Joint #2 in the Hillbilly Tansu Project is for the front drawer/door bearer.  This piece, for me, was the key to developing the rest of elements for the tansu construction.  Once I had this element designed all the rest sort … Continue reading →

Posted in Design, Hillbilly Tansu Joinery | Tagged , , , , | 1 Comment